1. Project name: Online detection of bottle liquid level and lid
2. Project introduction: Detect and remove the liquid level and lidless of bottles/cans
3. Maximum output: 72,000 bottles/hour
4. Container material: paper, plastic, aluminum, tinplate, ceramic products, etc.
5. Product capacity: 220-2000ml
1. Optimal altitude: 5-3000 meters above sea level;
2. Optimal ambient temperature: 5℃-40℃;
3. Optimal ambient humidity: 50-65%RH;
4. Factory conditions: Parameters such as ground levelness and ground bearing capacity can meet relevant national standards and meet the normal use requirements of the machine;
5. Storage conditions at the factory: After the parts and machines arrive at the factory, the storage location can meet the relevant national standards. During the storage process, pay attention to lubrication and maintenance to prevent damage to the surface of the parts or deformation, which will affect the normal installation, commissioning and use of the machine.
1. Power supply: 220V, 50Hz, single phase; provided by the customer (special voltage needs to be notified in advance, equipment-related parameters, delivery time and price will be different)
2. Total power: about 2.4kW;
3. Control voltage: 24VDC.
4. Compressed air: minimum 4 Pa, maximum 12 Pa (the customer provides the air pipe connection between the air source and the equipment host)
1. Equipment installation plan
Installation location: behind the filling machine, in front of or behind the inkjet printer
Installation conditions: ensure the same single-row conveyor chain, and the single-row straight length of the conveyor chain on the production site is not less than 1.5m
Installation progress: installation completed within 24 hours
Chain modification: cut a 15cm long guardrail gap on the straight chain to serve as the rejector of the detection equipment to reject defective products
Equipment composition: From a macro perspective, the equipment is mainly composed of detection devices, rejection devices, power distribution cabinets, human-machine interfaces, electronic components, mechanical parts, etc.
Placement of defective product containers: It is recommended that the buyer make a hard box and install it in combination with the defective product rejection drop position
Principle: The tank body passes through the X-ray emission channel. Using the penetration principle of X-rays, products with different liquid levels form different projections at the ray receiving end and display different numerical values on the human-machine interface. At the same time, the control unit quickly accepts and processes products corresponding to different numerical values, and determines whether the liquid level of the product is qualified based on the standard parameters set by the user. If the product is confirmed to be unqualified, the detection system will automatically remove it from the conveyor line.
Non-contact online detection, no damage to the tank body
The counting method is an encoder, which is installed on the synchronous motor of the chain where the bad tank is located. As long as the digital number of the bad tank is recorded, the rejection effect is not affected by the line body pause or speed change, and the rejection accuracy is high
It can automatically adapt to different production line speeds and dynamically realize detection
The detection cabinet and control cabinet are separated, and the signals between electronic components are not interfered by electromagnetic waves, and the performance is more stable
It adopts stainless steel shell, the main engine is sealed and designed and manufactured, anti-fog and anti-water droplets, and has strong environmental adaptability
It automatically blocks the emission of X-rays when idle
It adopts hardware circuit implementation and embedded operating system to ensure long-term stable operation
It alarms with sound and light at the same time, and automatically rejects unqualified containers.
It uses a 7-inch display touch screen to provide a simple and reliable human-machine operation interface, and it is flexible to change the tank type
The large screen Chinese display, LED backlight LCD, clear and bright handwriting, and human-machine dialogue operation.
It does not contain isotope radiation sources, and the radiation protection is safe and reliable.
The core parts of Fanchi X-ray Level Inspection, such as the transmitter (Japan), receiver (Japan), human-machine interface (Taiwan), cylinder (UK Norgren), solenoid valve (US MAC), etc., are all imported with excellent performance. They can be compared with foreign brands such as US Feida, with similar detection results. There are real cases, such as Hande Wine Industry and Senli Group, with high cost performance.
Production line conveyor belt speed: ≤1.3m/s
Container diameter: 20mm~120mm (different container material density and diameter, different device selection)
Dynamic container resolution: ±1.5mm (foam and shaking will affect the detection accuracy), about 3-5ml
Static container resolution: ±1mm
Unqualified container rejection rate: ≥99.99% (when the detection speed reaches 1200/minute)
Usage conditions: Ambient temperature: 0℃~40℃, relative humidity: ≤95% (40℃), power supply: ~220V±20V, 50Hz
After the equipment is powered on 5S, the program automatically boot into the detection of the interface, the interface will be real-time display of the parameters of the detection of information, such as the total number of detection, the number of unqualified, real-time parameter values, bottle type information and login window.
Good Level:
Rejector Set Interface: